Automobile wiring harness is composed of two parts: terminal and wire. In terms of the requirements for terminals, it is necessary to achieve two points: stable conduction and insulation safety. Because any terminal failure will cause the failure of the entire system engineering. As an important accessory product for the safe operation of automobiles, the quality of automobile terminals is always concerned by customers. It is very important to effectively check and prevent terminal failures.
TXGA automotive terminal has won the trust of customers with its strong and durable performance. Original authentic products, complete models, online purchase, and fast delivery. Need car terminal, click to enter [Product Center] to buy.
How to check the car terminal when a fault such as poor contact occurs in a short time?
(1) Disconnect the connector.
(2) Visually check for rust or foreign matter on the connector terminals.
(3) Check the position of the terminal pin for looseness or loss. Gently pull the electrical wiring and check if they are disconnected.
(4) Check the joint surface of the socket of the socket, and insert the plug into each socket.
(5) Hold the socket with your hand, swing it left and right, and check whether the terminal sinks due to its weight.
Standard: When you see that the terminal pin is pinched, it can be judged as normal. When the plug sinks in the socket and there is no contact pressure, the male and female terminals of the terminal should be replaced.
TXGA is a 15-year high-quality brand and serves customers with excellent product quality. The professional technical team promises to provide customized services, and the official website consultation promises to respond within 24 hours. When purchasing automotive terminals, trust TXGA.
