你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

Two wiring methods when connecting the network cable crystal head

The network cable crystal plug is also called RJ45 plug (RJ45 Modular Plug), under normal circumstances we can see it in the network plug on the back of the computer and the router. When the computer and the router are connected to each other through the crystal connector of the network cable, the Internet can be accessed. TXGA is a professional network cable crystal head manufacturer, focusing on providing customers with high-quality and reliable connector products for 15 years. Order online, complete specifications, support worry-free after-sales and seven days no reason to return, click to enter [Product Center], and buy immediately.

The connection technology of the network cable crystal head is very mature. In general applications, we can use two methods to connect it.

1. Parallel wire connection method: Use professional tools to cut one end of the network cable neatly, then put the neatly cut network cable into the wire stripping clamp, remove the coat of the head, and arrange the 4 pairs of core wires side by side. Separate it and use the 568B sorting method to insert the network cable crystal head. After confirming that all the core wires are inserted into the bottom, use the network cable pliers to press the crystal head tightly to ensure that the network cable can be closely attached to the crystal head.

2. Cross-wire connection method: The characteristic of the cross-wire connection method is that one end adopts the 568A core line arrangement standard, and the other end adopts the 568B core line arrangement standard. This will form a cross between the cores. After connecting the crystal plug at both ends of the network cable, you need to do a test to ensure that the network cable crystal plug has been successfully connected.