There are a variety of connector models and a wide range of application scenarios. Even products of the same category have a wide variety of models to choose from. Therefore, the selection process of procurement is very important. Only through rigorous selection and screening can we truly find the products we need.
1. Number of pins and pin spacing
The number of pins and pin spacing are the basic basis for connector selection. The number of pins chosen for the connector depends on the number of signals that need to be connected. For some chip connectors, the number of pins should not be too many. Because in the welding process of the placement machine, due to the high temperature, the plastic of the connector will be deformed by heat, and the middle part will bulge, resulting in virtual welding of the pins, resulting in a wide range of product defects.
2. Electrical performance
The electrical properties of the connector mainly include: limiting current, contact resistance, insulation resistance and electric strength. When connecting a high-power power supply, pay attention to the limit current of the connector; when transmitting high-frequency signals such as LVDS, PCIe, etc., pay attention to the contact resistance. Connectors should have low and constant contact resistance, typically tens of mΩ to hundreds of mΩ.
3. Environmental performance
The environmental performance of the connector mainly includes: temperature resistance, humidity resistance, salt spray resistance, vibration, shock, etc. Choose according to the specific application environment. If the application environment is relatively humid, the requirements for the connector's moisture resistance and salt spray resistance are high, so as to prevent the metal contacts of the connector from being corroded. In the field of industrial control, the requirements for the anti-vibration and shock performance of the connector are high, so as to prevent the connector from falling off during the vibration process.
The connector manufacturer TXGA provides a variety of connector products, which are custom-made from the original factory and shipped quickly in stock. Enter the TXGA [Product Center] to place an online order, and the sale starts from 1pc.
